Thermablok NASA Spinoff Listed
space shuttle launch

Facebook Twitter LinkedIn YouTube

Thermalblok insulation strips easily applied to metal stud
One Thermablok® Strip Increases
R-Value up to by 40%

Infrared detects heat loss (thermal bridging) in building
Infrared camera displays heat coming through the studs in a
wall. Known as "thermal bridging" this is the prime energy loss in a building. Thermablok interrupts this wasteful process.

Thermablok® Aerogel Thermal Insulating Strips for Commercial Applications

Thermablok

Thermablok Aerogel Insulation Strips may be installed to the stud either on the exterior or interior side of the wall framing. Insulate the full length of framing members. Apply to all wall, floor or ceiling framing edges: headers, footers, trusses, window and door frames, floor joist and roof rafters. See Installation Instructions page.

Thirty-five percent of home heating costs are the result of energy loss through the exterior walls because of thermal bridging. Thermablok Eliminates Thermal Bridging.

New Construction / Remodelling / Expansions

Standard applications

Thermablok Aerogel Insulation strips enhance or replace continuous insulation, yielding equivalent results while providing the certainty of using environmentally friendly materials. The Thermablok Aerogel Insulation Strip can be attached to the framing members on the inside face, the outside face, or both.

See Insulation Instructions in the top banner links on this page.

  • Fiberglass batt.
  • Fiberglass sheet.
  • Radiant barrier insulation.
  • Foam insulation.
  • Organic batt insulation such as cellulose insulation.

Contact Thermablok Technical Support regarding your specific application requirements